جزئیات محصول:
پرداخت:
|
| Product Name: | Galvanized Steel Power Pole | Shape: | Polygonal or Round |
|---|---|---|---|
| Material: | Gr50 Gr65 | Galvanizing: | ASTM A123 |
| Life time: | 50 years | Welding Standard: | AWS D 1.1 |
| برجسته: | galvanized light pole,power distribution poles,power distribution poles |
||
Galvanized Cameroon 9m-13m Electric Steel Power pole with Bitumen Gr50
Steel
The material is in accordance with NF EN 10025
Standard and NF EN 10149 Standard,it has the following property.
-Yield Strength=355N/mm2
-Toughness remains the same under 20 degrees below zero.
-Galvanization is in accordance with NFA35503 Standard Class 1.
Specifications:
| Electric Pole Specification for Cameroon Market | ||||||
| Height | Load(Dan) | Top Diameter(mm) | Bottom Diameter(mm) | Pole Thickness(mm) | Section | Pole Shape |
| 9M | 200 | 120 | 210 | 3 | 1 | Octagonal |
| 9M | 325 | 130 | 270 | 3 | 1 | |
| 9M | 350 | 120 | 240 | 3 | 1 | |
| 11.8M | 800 | 140 | 332 | 4.5 | 1 | |
| 11.8M | 1000 | 175 | 370 | 4.5 | 1 | |
| 12M | 800 | 140 | 332 | 4.5 | 2 | |
| 12M | 1000 | 175 | 370 | 4.5 | 2 | |
| 13M | 400 | 150 | 370 | 3 | 2 | |
| 13M | 800 | 200 | 475 | 3.5 | 2 | |
| 13M | 1250 | 240 | 590 | 3.5 | 2 | |
The information to inquiry or purchase
-Steel pole height and force
-Cross arm type and length,the position to install in the steel pole
-The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole to install the cross arm)
-Safety factor of the steel pole
-Wind speed
-Type of climbing rung
-Destination port
-Other.
Technical information-Cross Arm
Installation
-Remove all the equipment on the pole during Assembly.
-Circle a sling around th epole shaft of each section.
-Fix the sling on top section to one pulley block.
-The sling on the bottom section is tightly fixed and fixed at the center of gravity.
-Make the steel pole vertical by tighten the sling of the top section.
-Fix the steel pole.
-Remove the sling.
Quality Control
We strictly follow the standard of ISO9001-2008. Quality is in the first place at every stage of production to ensure the product compliance to the specification/standards. Careful inspections are carried out by highly trained inspection engineers during every procedure from raw material stage to finished product and delivery.
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on.
We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the high mast pole for Sochi Winter Olympic Game and so on.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
قطب قدرت الکتریکی نازک گالوانیزه برای پروژه بیش از حد
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
